FRP anchor is a kind of concealed engineering, but if the construction quality has the question, will cause the construction accident easily to produce, therefore, the anchor bolt support is in the construction, very important one link. In addition, because it is a very effective way of supporting roadway, it can have a good supporting effect and save a lot of money. But what are the rules to follow when installing the bolt?

When selecting FRP bolt, it should be selected according to the diameter of the hole, so as to prevent the size of FRP bolt from not matching, resulting in improper.According to the design requirements, the drilling depth should be a little less than 60 to 80mm less than the length of the rod body. This selection size should be paid more attention to when selecting the bolt.

It is very easy to damage the bolt body of fiberglass anchor. Therefore, when transporting and storing, it is necessary to pay attention to the protection of the rod body to prevent damage. The bolt should not be placed in the open air, especially in sunny places. It should not be exposed in such places to prevent the exposure to the sun, accelerate the aging of the bolt, and reduce the service life of the bolt.

Originally, the installation of fiberglass anchor rods, but to ensure the construction safety of the key. Therefore, anchor bolt installation is sure to arouse the attention of operators. In the installation, you definitely need to pay attention to these installation things.

If you are interested in our products, please leave a message or contact us.

Tel:+86-182 3676 6038 

+86-150 3902 1061

Fax: +86-0371-6053 5957

E-mail: zxminesupport@zxsteelgroup.com