1. Check the product specifications and models before installation, and check whether the appearance of the product is abnormal.

2. Use low-pressure fluid such as air and water to clear the holes, and avoid water accumulation in the holes.

3. Before starting the stirring, the required anchoring agents should be sent to the bottom of the hole one by one, and then the drilling tool should be started to drive the anchor rod, and while stirring, advance to the bottom of the hole and continue to stir to the specified time.

4. Stirring time and waiting time are in accordance with the instructions.

5. Before the resin anchoring agent gel should prevent the rod body from falling due to its own weight.

6. The anchoring section of FRP anchor rod strictly prevents grease pollution.

7. The anchoring force can be tested only after reaching the specified age. After that the product should be stored in a ventilated, moisture-proof and sun-proof warehouse. The maximum storage temperature should not exceed 30 degrees Celsius.

Zongxiang Steel Group has operated and sold iron and steel products for more than 20 years, mainly engaged in the operation of mine tunnel support products and accessories. Our company can provide customers with high-quality steel and competitive prices. If you have any requirement, please call us or leave us a message on the website. We believe that with your advice and help, we will do better.

Tel: +86 182 3676 6038(Whatsapp)
Email: zxminesupport@zxsteelgroup.com